Laminate Panel 14 is suitable for new constructions and renovations with carpet floors. In particular, Laminate Panel 14 is the perfect solution for extending floor heating comfort beyond tile and stone floors or for retro-fitting to existing rooms with carpet floors.
The under carpet floor heating system can be used as the primary heating system, or as an auxiliary heating solution along other room heating systems.
Installation of Laminate Panel 14 under carpet floor heating involves installing the heating mat between the carpet and underlay. An extensive range of sizes allows flexibility for a range of room sizes and unlimited furniture layouts.
Laminate Panel 14 features a thin 1.5mm heating conductor with Fluropolymer insulation (known as Teflon) sandwiched between a reinforced laminated aluminum foil, designed to make any room with carpet flooring in your home more comfortable.
| Application | Direct & background 2mm heating panel for installation between carpet and underlay |
| Construction | Pre-measured heating element sandwiched between reinforced laminated aluminum foil, with the a 3m length cold tail lead existing the heating mat from one corner |
| Element Construction | 1.5mm Self regulating twin heating conductor insulated with Fluropolymer (known as Teflon) |
| Voltage | 240V AC |
| Output Power | 140W/m² |
| Control | Analog or Digital Programmable room or floor sensing (or a combination of both) thermostat |
| Safety | Connection to electrical supply must conform to AS/NZS 3000 wiring regulations |
| Warranty | 5 Years |
Laminate Panel 14 Strip Range
| Product Code | Mat Size (mtr) | Floor Area (m²) | Watt @ 240V | Amp @ 240V |
| LP140-14S | .5 x 2 | 1 | 2140 | 0.6 |
| LP210-14S | .5 x 3 | 1.5 | 210 | 0.9 |
| LP280-14S | .5 x 4 | 2 | 280 | 1.2 |
| LP350-14S | .5 x 5 | 2.5 | 350 | 1.5 |
| LP420-14S | .5 x 6 | 3 | 420 | 1.8 |
| LP490-14S | .5 x 7 | 3.5 | 490 | 2.1 |
| LP560-14S | .5 x 8 | 4 | 560 | 2.4 |
| LP630-14S | .5 x 9 | 4.5 | 630 | 2.7 |
| LP700-14S | .5 x 10 | 5 | 700 | 3.0 |
| LP840-14S | .5 x 12 | 6 | 840 | 3.7 |
| LP980-14S | .5 x 14 | 7 | 980 | 4.3 |
| LP1120-14S | .5 x 16 | 8 | 1120 | 4.9 |
| LP1260-14S | .5 x 18 | 9 | 1260 | 5.5 |
| LP1400-14S | .5 x 20 | 10 | 1400 | 6.1 |
| LP1540-14S | .5 x 22 | 11 | 1540 | 6.7 |
| LP1680-14S | .5 x 24 | 12 | 1680 | 7.3 |
| LP2100-14S | .5 x 30 | 15 | 2100 | 9.1 |
Installation of Thin Cable Mat is a simple process offering reduced installation time. After the subfloor has been prepared (cleaned and in some cases primed with a bonding agent), Thin Cable Mat is rolled out and stuck to the floor using the attached adhesive tape strips. The flooring can be immediately installed after the element fault monitor is connected to the cold tail leads.